Standby power solution for laboratory facilities at Wits University, Braamfontein, Johannesburg.
Wits University had two smaller generators that were experiencing problems and did not provide sufficient output for the laboratory facilities during load shedding. The existing generators needed to be removed to make way for a larger standby-power solution.
Following discussions and consultation with Wits University, GenTech SA supplied a 500 kVA Scania diesel generator sized to support the required laboratory load during mains power interruptions.
The project required planning around access, crane positioning, removal of the existing generator sets and placement of the new 500 kVA unit. The original project record notes that the lifting operation involved a 13-storey building and required careful consideration of daily university activities and site safety.
GenTech SA completed the installation in three days. The new 500 kVA generator provided Wits University with a substantially larger standby-power solution for the laboratory facilities during load shedding. The original project record states that Wits University complimented GenTech SA on the completed work.
| Generator Rating | 500 kVA |
|---|---|
| Engine | Scania DC16 093A (02-51) |
| Alternator | Werna 500 kVA |
| Controller | SmartGen 7320 |
| Phase | Three phase |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Operating System | AMF - Automatic Mains Failure |
| Enclosure | Sound-attenuated canopy |
| Fuel System | Diesel |
| Application | Standby / backup power supply for laboratory facilities |
From generator selection and custom manufacture to controls, ATS/AMF, delivery, installation and commissioning, speak to our team about your project requirements.