Engine Specs
20KVA FAW DIESEL GENERATOR
Powered by 4dw81-23d, 4 Cyl, 4-Stroke, Diesel series engine.
Engine make | 4dw81-23d |
Displacement | 2.27L |
Cylinder bore/stroke | 85mm x 100mm |
Fuel system | In Line fuel Injection Pump |
Cylinders | 4 |
Cylinder arrangement | Vertical inline |
Engine output power at 1500rpm | 17 KW |
Turbocharged or normally aspirated | Normally Aspirated |
Cycle | 4 Stroke |
Combustion system | Direct Injection |
Compression ratio | 17:1 |
Fuel tank capacity | 150 Litres |
Fuel consumption 100% | 5.8 L/H |
Fuel consumption 75% | 3.8L/H |
Fuel consumption 50% | 2.9L/H |
Fuel consumption 25% | 1.4L/H |
Oil type | 15W40 |
Oil capacity | 8 Liter |
Cooling method | Watercooled |
Coolant capacity (including radiator) | 12 .5 Litre |
Starter | 12 volt |
Governor system | Electronic |
Engine speed | 1500 RPM |
Alternator Specs
20 KVA Werna/Evotech Alternator or Equal
Condition: New product
Phase: 3 Phase
Frequency: 50 Hz
Voltage: 380V 3 Phase
Protection: Yes
Rpm speed: 1500 rpm
Poles: 4
Efficiency: 94.8%
Constant speed alternator
Brushless
Voltage regulator: AVR
Controller System Specs
Smartgen Controller
SmartGen generator controllers are used for automatic and monitor control system of gen-set to achieve automatic start/stop, data measure and alarm protection. The controller adopts large liquid crystal display (LCD) and selectable Chinese, English or other languages interface with easy and reliable operation.
Gen-set automatic controllers adopt 32 bits microprocessor technology with precision parameters measuring, fixed value adjustment, time setting and
threshold adjusting and etc.. Majority parameters can be configured from front panel, and all parameters can be configured by USB interface (or RS485/Link interface) to adjust via PC. It can be widely used in all types of automatic gen-set control system with compact structure, advanced circuits, simple connections and high reliability.
Warranties & Other Info
ENGINE MECHANICAL WARRANTY 1 YEAR / 1000 HRS
From date of collection/Delivery
Warranty is only on Mechanical Parts not on Electrical Components
Warranty only applies if service schedule is maintained
Warranty Void: Electrical cable are connected correctly
Generator overload, abused or the machine is glazing(Under Load or Unbalance Phasing ).
SERVICE SCHEDULE:
First Service: 50 hrs / 3 Months
Second Service: 200 hrs / 6 Months
Third Service: 550 hrs / 12 Months, Continue once a year or 1000hrs
AUTOMATIC START: 10 SECONDS DELAY, 10 TO 35 SECONDS WARMUP
PLEASE NOTE: Generator must not run less than 35% of load for long periods this will cause glazing. All ratings are approximate and at SEA LEVEL. Engines need to be de-rated for altitude. A rough guide to de-rate performance is 1% for every 100m above sea level. I.e: A 20KVA at sea level is an 18KVA at 1000m above sea level (10% less) etc.
The generator will not be able to take the full load instantaneously. The load should be added to the generator gradually. 50% initially and then stepped up over time once engine is up to temperature.
Gentech SA has different canopies. Canopy of Generator depends on availability and what is in stock.